Features >>>>>

      High-Performance Modified RISC CPU:

      • Modified Harvard architecture
      • C compiler optimized instruction set architecture
      • 84 base instructions with flexible addressing modes
      • 24-bit wide instructions, 16-bit wide data path
      • 16 x 16-bit working register array
      • Up to 30 MIPs operation:
        • DC to 40 MHz external clock input
        • 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
      • Peripheral and External interrupt sources
      • 8 user selectable priority levels for each interrupt
      • 4 processor exceptions and software traps
      • Primary and Alternate interrupt Vector Tables

      DSP Engine Features:

      • Modulo and Bit-Reversed Addressing modes
      • Two, 40-bit wide accumulators with optional saturation logic
      • 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
      • Single cycle Multiply-Accumulate (MAC) operation
      • 40-stage Barrel Shifter
      • Dual data fetch

      Peripheral Features:

      • High current sink/source I/O pins: 25 mA/25 mA
      • Optionally pair up 16-bit timers into 32-bit timer modules
      • 3-wire SPI™ modules (supports 4 Frame modes)
      • I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
      • Addressable UART modules with FIFO buffers

      Motor Control PWM Module Features:

      • Complementary or Independent Output modes
      • Edge and Center Aligned modes
      • Multiple duty cycle generators
      • Dedicated time base with 4 modes
      • Programmable output polarity
      • Dead time control for Complementary mode
      • Manual output control
      • Trigger for synchronized A/D conversions

      Quadrature Encoder Interface Module Features:

      • Phase A, Phase B and Index Pulse input
      • 16-bit up/down position counter
      • Count direction status
      • Position Measurement (x2 and x4) mode
      • Programmable digital noise filters on inputs
      • Alternate 16-bit Timer/Counter mode
      • Interrupt on position counter rollover/underflow

      Analog Features:

      • 10-bit 1 Msps Analog-to-Digital Converter (A/D)
      • A/D Conversion available during Sleep and Idle
      • 4 Sample/Hold Channels
      • Multiple Conversion Sequencing Options

      Special Microcontroller Features:

      • Enhanced Flash program memory:
        • 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
      • Data EEPROM memory:
        • 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
      • Self-reprogrammable under software control
      • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
      • Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
      • Fail-Safe clock monitor operation
      • Detects clock failure and switches to on-chip low power RC oscillator
      • Programmable code protection
      • In-Circuit Serial Programming™ (ICSP™)
      • Programmable Brown-out Detection and Reset generation
      • Selectable Power Management modes
        • Sleep, Idle and Alternate Clock modes

      CMOS Technology:

      • Low power, high speed Flash technology
      • Wide operating voltage range (2.5V to 5.5V)
      • Industrial and Extended temperature ranges
      • Low power consumption


dsPIC30F2010 28-pin 20MHz 16-bit

  • Product Code: dsPIC30F2010 28-pin 20MHz 16-bit
  • Availability: In Stock
  • 280

  • Ex Tax: 280
  • Price in reward points: 10

Tags: dsPIC30F2010 28-pin 20MHz 16-bit